Straight sided, polycarbonate round pillar candle mould. Has wick holder support lips on the top for easier wick centering.
Mould has a diameter of approx 60mm and stands 200mm tall.
Product Code: OMX005
£10.05
|
Sphere, polycarbonate candle mould. Mould is in two pieces which click together, with a pouring hole at the top and groove for holding the wick support. Base has three legs to hold the mould straight whilst the wax hardens.
Sphere mould has a 65mm diameter.
Product Code: MLD005187
£7.29
|
Sphere, polycarbonate candle mould. Mould is in two pieces which click together, with a pouring hole at the top and groove for holding the wick support. Base has three legs to hold the mould straight whilst the wax hardens.
Sphere mould has a 80mm diameter.
Product Code: OMX026
£9.09
|
Sphere, polycarbonate candle mould. Mould is in two pieces which click together, with a pouring hole at the top and groove for holding the wick support. Base has three legs to hold the mould straight whilst the wax hardens.
Sphere mould has a 70mm diameter.
Product Code: MLD005189
£10.49
|
2 piece, flame, polycarbonate candle mould. The two are clipped together with a rubber seal between.
Mould supplied with:
. 2 piece mould
. 2 sturdy clips
. Rubber seal
. Metal wick support pin
. Instructions for use
Product Code: MLD005191
£14.55
|
Large, polycarbonate mould for producing a large disc shaped candle.
. Heat resistant up to 120 C
. Legs for stable base
. 2 Part mould
Product Code: MLD007266
£14.15
|
Large, polycarbonate mould for producing a Medium, disc shaped candle.
. Heat resistant up to 120 C
. Legs for stable base
. 2 Part mould
. Measure approx 105 x 56 x 100 mm
Product Code: MLD007267
£12.59
|
Re-usable tea light holders made from polycarbonate. Lovely for scented or coloured tea lights to suit your décor.
. Will make tea lights with an approx 6 hour burn.
. Re-usable
. Can be used with blended wax or Eco-soya wax.
. Measure approx 40mm in diameter and 18mm high.
Product Code: MLD007567
£2.29
|
Small, pyramid shaped candle mould with built-in stand.
Mould produces candles approx 8.5cm tall, with a base of approx 4.5 square.
Product Code: MLD007917
£3.15
|
Small, cone shaped candle mould with built-in stand.
Mould produces candles approx 8.5cm tall, with a base diameter of approx 5.5cm.
Product Code: MLD007918
£3.15
|